Implementation (acc. to PN-B-20132):

Walls:
• thermal insulation of cavity walls with ventilated air gap
• thermal insulation of cavity walls with non-ventilated air gap
• settlement joints insulation
• thermal insulation in light constructions with external layer
• thermal insulation in light constructions of partition walls
• thermal insulation of structural walls with external layer

Floors, ceilings:
• thermal insulation of ceilings from below with external layer
• thermal insulation of floors between joists
• thermal insulation of light frame ceilings with external layer
• thermal insulation between rafters
• thermal insulation on ventilated flat roofs

• conformity to the PN-EN 13163:2004 Standard
• marking code:
   EPS EN 13163-T1-L1-W1-S1-P2-BS75-CS(10)50-DS(N)5-DS(70,-)3
• fire reaction: "E" EURO CLASS
• declared heat conduction coefficient: <= 0.042 [W/m2K]
• compressive stress at 10% deformation: >= 50 kPa
• Deflection resistance: >= 75 kPa

Implementation (acc. to PN-B-20132):

Walls:
• walls thermal insulation of elements with external layer and ventilated air gap
• walls thermal insulation with Seamless Insulation Systems
• walls thermal insulation in the Light-Wet method
• thermal insulation of upper frames made as a frame under plastering
• thermal insulation of thresholds and door frames

Floors, ceilings:
• thermal insulation of ceilings from below with Seamless Insulation Systems
• thermal insulation of ceilings from below in the Light-Wet method
• thermal insulation and boarding of reinforced concrete ceilings

• conformity to the PN-EN 13163:2004 Standard
• marking code:
   EPS EN 13163-T2-L2-W2-S2-P3-BS115-CS(10)70-DS(N)2-DS(70,-)2-TR 100
• fire reaction: "E" EUROCLASS
• declared heat conduction coefficient: <= 0.040 [W/m2K]
• compressive stress at 10% deformation: >= 70 kPa
• deflection resistance: >= 115 kPa

Implementation (acc. to PN-B-20132):

Walls:
• thermal insulation of plinths in seamless insulation systems
• thermal insulation of walls below the ground, with water proof insulation, normal loading

Floors, ceilings:
• thermal insulation of floors under pre-fabricated boards
• thermal insulation of floors under floor base, normal charge
• thermal insulation of floors on the ground with floor base normal loading
• thermal insulation between rafters
• thermal insulation of full flat roofs without access

• conformity to the Standard PN-EN 13163:2004
• marking code:
   EPS EN 13163-T1-L1-W1-S1-P3-BS150-CS(10)100-DS(N)5-DS(70,-)2 DLT(1)5
• Fire reaction: "E" EUROCLASS
• declared heat conduction coefficient: <= 0.038 [W/m2K]
• compressive stress at 10% deformation: >= 100 kPa
• deflection resistance: >= 150 kPa

Implementation (acc. to PN-B-20132):

Walls:
• thermal insulation of walls under the ground level with water proof insulation, heavily loaded

Floors, ceilings:
• thermal insulation of floors under floor base heavily loaded
• thermal insulation of floors base laying on the ground, heavily loaded
• thermal insulation of floors base laying on the ground, normally loaded
• thermal insulation on the bearing construction under tiles roof cover

Other:
• construction fill of dams, bridge abutments and other civil constructions
• insulation layer protecting road constructions from freezing

• conformity to the Standard PN-EN 13163:2004
• marking code:
   EPS EPS-EN 13163-T1-L1-W1-S1-P4-BS250-CS(10)200-DS(N)5-DS(70,-)2-DLT(1)5
• Fire reaction: "E" EUROCLASS
• declared heat conduction coefficient: <= 0.036 [W/m2K]
• compressive stress at 10% deformation: >= 200 kPa
• deflection resistance: >= 250 kPa